| Ideal
for all industrial. Commercial and Residential Buildings
For use on virtually all surfaces such as Stucco
* Cement * Concrete Composite
Cementitious Siding * Wood * Composite Wood Products *
Vinyl and Primed Metals
Canada Paints is an approved
authorized Distributor for the Ceramic Insulcoat products.
This product keeps homes and buildings COOL in
the summer and WARM in the winter, minimize your
energy costs.
This Interior and Exterior Paint and Coating
Systems provide a thermal barrier, restricting heat transfer
through most building envelopes. Lab tests, field trials
and end-user testimonials show exceptional results. "Life-cycle
cost" savings are truly substantial.
 CERAMIC
INSULCOAT- EXTERIOR WALL is a strong, tough coating,
formulated with hollow-core ceramic microspheres, strands
and irregular particulate in a complex, 100% acrylic suspension
with superior adhesion, breathability, elasticity and
weatherproofing. It is designed to provide the ultimate
protection against Ultra-Violet degradation and weathering.
Ceramic InsulCoat EXTERIOR WALL has demonstrated
thermal resistance under laboratory tests when compared
to Batt Insulation. For optimum results always use highest
standard building envelope preparation systems.
Ceramic
Insulcoat Exterior Wall Benefits |
| Long-Lasting Finish
Lasts up to 20 years or more. |
Titanium Dioxide Enriched
Titanium Dioxide has ten times the refractive index
of diamond and is an excellent UV inhibitor. |
| Thermal Barrier Protection.
Ceramic particulate reflects heat, enhances heat management
and extends life-cycle performance actors. |
Weatherproof Creates
a weatherproof membrane that significantly reduces
potential damage and deterioration of the substrate.
Reduces rot and mildew formation. |
| Energy Efficient Ceramic
Insulcoat R:E coating systern helps reduce energy
by reflecting heat rays away from the coated surface.
End users report four to fifty percent reduction in
energy consumption plus greater creature comfort. |
Easy Maintenance Easy
to wash with municipal water pressure and conventional
techniques |
| Environmentally Friendly
100% acrylic water-based product that meets today's
strict environmental guidelines. |
Fire Resistant Does not
burn in the pail. Self extinguishing, does not support
flame spread. |
| Colour-Fast Full range
of colours. Resists fading. White, pastels, bright
and accent colours available. |
Breathable Allows water
vapour to escape from the interior. |
Simple-5-step Restoration Process
- Pressure wash and clean, airbrush and clean substrate.
Remove all loose materials.
- Apply EnviroWash - Fungicide treatment where applicable.
- Repair all leaks. For substrate restoration, Master
Painters preparation guidelines are recommended. Use
proper envelope or substrate preparation systems.
- Apply Ceramic InsulSeal to porous substrates. Appropriate
Primers may be required.
- Finish with Ceramic InsulCoat WALL for protection,
enhanced insulation and
beautification.
 
Contact
Us for further specific technical information! |
